Juniper MX104 3D страница 25 Скачать руководство пользователя | Manualshive

Страница: 25 / 25

background image

To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool:

https://tools.juniper.net/SerialNumberEntitlementSearch/

Opening a Case with JTAC

You can open a case with JTAC on the Web or by telephone.

•

Use the Case Management tool in the CSC at

http://www.juniper.net/cm/

.

•

Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).

For international or direct-dial options in countries without toll-free numbers, visit us at

http://www.juniper.net/support/requesting-support.html

Revision History

April 11, 2016—530-062013. Revision 2. Updates grounding information.

January 2015—530-062013. Revision 1. Minor updates.

November 2013—530-053224. Revision 1. Initial release.

Copyright © 2016, Juniper Networks, Inc. All rights reserved.

Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.

25

Copyright © 2016, Juniper Networks, Inc.

Requesting Technical Support

«
...
23
24
25

Содержание MX104 3D


























Отзывы:

Нет отзывов

Похожие инструкции для MX104 3D

Бренд: Mixcder Страницы: 75

Бренд: Fortinet Страницы: 31

Бренд: Hirschmann Страницы: 42

Бренд: Mach Power Страницы: 30

Бренд: Rosewill Страницы: 8

Бренд: Xact Страницы: 16

Бренд: Airlinkplus Страницы: 4

Бренд: Airlink101 Страницы: 44

Бренд: Airlink101 Страницы: 48

Бренд: Airlink101 Страницы: 66

Бренд: Anycom Страницы: 16

Бренд: XTline Страницы: 29

Бренд: EnGenius Страницы: 2

Бренд: 4IPNET Страницы: 18

Бренд: TRENDnet Страницы: 19

Бренд: ELTEX Страницы: 65

Бренд: Cambium Networks Страницы: 2

Бренд: Delton Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды