Juniper Mesa Pro, Руководство пользователя

Страница: 19 / 76

2 Standard Features
19
2.3.3 Touchscreen Profiles
To adjust the touchscreen profile, go to Device Settings and
select Touchscreen . Select the touch profile you want the screen
optimized for: Finger/Stylus (default), Finger, Fine Hard-Tip Stylus,
Glove, Wet/Finger, or Wet/Stylus. As the new profile loads, a
progress bar is shown. You can try different profiles to see which
one works best.
Using the Mesa Pro in Wet Conditions
When using the Mesa Pro in wet conditions, you must use your
finger or the fine-tipped stylus that is included with the device
on the capacitive touchscreen, depending on the touchscreen
profile you have selected. When either of the Wet touchscreen
profiles are in use, the Mesa Pro must be held at a minimum 30
degree angle. While third party styli may work with the Mesa Pro
touchscreen, performance may vary.
CAUTION: Do not use the Windows 11 screen calibration tool. If
used, it may degrade the touchscreen performance.
2.4 LED Activity Indicators
LED activity indicators are located on the front of the Mesa Pro in
the upper-left corner.
Red LED, solid:
■ When the Mesa Pro is put to sleep or powered off by
pressing the power key , the red LED is solid until the unit
has successfully completed the process, and then the red
LED turns off. If powering off the device, do not remove the
batteries while the light is solid.
!