Juniper Mesa 3 Скачать руководство пользователя

Страница: 62 / 82

Mesa 3 Rugged Tablet Owner’s Manual

Certifications and Standards

There are North American, European Union, and Australian

versions of the Mesa 3, with different certifications and

standards.

United States

In compliance with the FCC rules 47 CFR 15.19(a)(3), the

statements that follow must appear on the device or in the

user documentation.
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

The device may not cause harmful interference.

This device must accept any interference received,

including interference that may cause undesired

operation.

In compliance with the FCC rules, 47 CFR 15.105(b), the

user must be notified that this equipment has been tested

and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

Содержание Mesa 3



















































































Результаты поиска

Содержание Mesa 3

Отзывы:

Похожие инструкции для Mesa 3

Бренды по названию

Популярные бренды

Juniper Mesa 3, Руководство пользователя

Результаты поиска

Содержание Mesa 3

Отзывы:

Похожие инструкции для Mesa 3

Бренды по названию

Популярные бренды