background image

8

  Mesa 3 Rugged Tablet Owner’s Manual

Standard Features

This chapter discusses the standard features included with 

every model of the Mesa 3 Rugged Tablet™ with Windows 

10 Pro.

Display and Touchscreen

The Mesa 3 has a bright color display and capacitive 

touchscreen with a diagonal viewing area of 7 inches  

(178 mm). 

Display and Touchscreen Profile Settings

Display Settings

To adjust the display settings including the text size, 

brightness, and orientation, go to the Action Center and 

select 

All

 

settings > System > Display

Backlight Brightness

There are a few shortcuts to adjust the display backlight 

brightness. 
Open the Action Center. Tap the percent tile (sun icon) to 

toggle the display backlight brightness up or down in 25% 

increments from 0% to 100%. This same tile can be accessed 

by tapping the battery icon on the desktop. To simply dim 

the backlight, tap the 

Battery saver

 tile. Tap it again to 

return it to the previous brightness.

Touchscreen Profile Settings

To adjust the touchscreen profile, go to the Start menu and 

select 

Touchscreen Profiles

. Select the touch profile you 

want the screen optimized for: Finger and Stylus (default), 

Finger, Stylus, Wet, or Glove. As the new profile loads, a 

progress bar is shown. Do not interrupt the loading process. 

You can try different profiles to see which one works best.

Using the Mesa 3 in Wet Conditions

When using the Mesa 3 in wet conditions, you must use 

your finger or the soft-tipped stylus that is included on the 

capacitive touchscreen, even if the Wet touchscreen profile 

is selected. The hard-tipped stylus is not supported with the 

Wet touchscreen profile. Third party styli may work with the 

Mesa 3 touch screen, however, performance may vary.

Содержание Mesa 3



















































































Отзывы: