Juniper Junos Space JA2500, Быстрый старт

Страница: 9 / 29

Figure 4: Front-and-Rear Mounting Recessed in a Rack
6.
Insert locking screws on the sides of the rear-mount brackets to secure the front and
rear mounting brackets in place.
7.
Verify that the mounting screws on one side of the rack are aligned with the mounting
screws on the opposite side and that the appliance is level.
Midmounting the JA2500 Appliance in a Two-Post Rack
This option allows the appliance to be mounted so that there is even clearance on the
front and rear of the rack.
To mount the appliance in a two-post rack, do the following:
1.
Remove the two front-mount rails from either side of the chassis.
2.
Insert one midmount bracket to the center on either side of the chassis.
3.
Attach the chassis to the equipment rack and insert the other two midmount brackets
on either side of the appliance to secure the chassis to the backs of the post, as shown
in
Figure 5 on page 10 .
9 Copyright © 2018, Juniper Networks, Inc.
Midmounting the JA2500 Appliance in a Two-Post Rack