J-series Services Router Quick Start
8
!
Basic Connection and Configuration with the J-Web Interface
2. Updating the Software with the J-Web Interface
After starting up the Services Router, you might want to download the latest version
of the JUNOS software from the Juniper Networks Web site and load it onto the
router. To update the JUNOS software:
1.
Go to
http://www.juniper.net/support
, and follow the links to download the
JUNOS software for J-series routers to your PC or laptop.
2.
Log in to the J-Web interface
3.
Click
Manage>Software
>
Upload software package
.
4.
Click
Browse
, locate the JUNOS software package file on your PC or laptop hard
drive, and open the file.
5.
Select the check box next to
Reboot If Required
, and click
Upload Package
.
For complete instructions, see the
J-series Services Router Administration Guide
.
3. Adding Licenses with the J-Web Interface
If you purchased one or more licenses, you received an envelope with instructions
for obtaining license keys from the Web. To enable each license on the router, you
must add the license key. You can add one or more license keys. To add a license
key and enable a license:
1.
Follow the instructions in your license envelope to generate the license key
from the Web site.
2.
Copy the license key onto the router with the J-Web interface:
a.
Click
Manage>Licenses
.
b.
Enter the license key in one of the following ways:
!
In the License File URL box, type the URL for the license key Web site.
!
Copy the license key text, and paste it into the License Key Text box,
separating multiple license keys with a blank line.
c.
Click
OK
.
For complete instructions, see the Getting Started Guide for your router.
4. Configuring Basic Settings with J-Web Quick Configuration
When you click
OK
or
Apply
on J-Web Quick Configuration pages, the configuration
is saved and activated automatically. To configure basic settings with the J-Web
interface:
1.
If the Set Up Quick Configuration page is not displayed, select
Configuration
>
Quick Configuration
>
Set Up
.
