Juniper EX3200 Series Скачать руководство пользователя страница 70

Страница: 70 / 310

Table 25: Chassis Viewer for EX4500 Switches

Description

Field

Front View

In the image, the colors listed below denote the interface status:

•

Green—Interface is up and operational.

•

Yellow—Interface is up but is nonoperational.

•

Gray—Interface is down and nonoperational.

Mouse over the interface (port) to view more information.

For a Virtual Chassis configuration, select the switch to view the interface status.

If an SFP+ uplink module is installed in the switch, mouse over the interface (ports) on the
module for more information.

For 1-Gigabit Ethernet and 10-Gigabit Ethernet ports, the interfaces appear dimmed if no
transceiver is inserted. The chassis viewer displays

Transceiver not plugged-in

when you mouse

over the port icon.

Interface status

LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display.

LCD panel

The console port is used to connect the switch to a management host such as a PC or a laptop.

Console port

The management port is used to connect the switch to a management device for out-of-band
management. Use this port for initial switch configuration.

Management (

me0

) port

Indicates the USB port for the switch.

NOTE:

We recommend that you use USB flash drives purchased from Juniper Networks for

your EX Series switch.

USB port

Rear View of the EX4500 Switch

Mouse over the fan tray icon to display status of the fans and airflow direction information. For
a Virtual Chassis, the status of the fans of the selected member switch is displayed.

Fan tray

Displayed only when switches are configured as a Virtual Chassis. The colors listed below denote
the VCP status:

•

Green—VCP is up and operational.

•

Yellow—VCP is up but is nonoperational.

•

Gray—VCP is down and nonoperational.

Virtual Chassis port

Mouse over the power supply icons to display name, status, and description information.

Power supplies

Mouse over the module to display details of the intraconnect module. The intraconnect module
helps the switch achieve line rate on all its ports.

Intraconnect module

Mouse over to display details of the switches in the Virtual Chassis configuration.

Virtual Chassis module

EX3200 Switch Hardware Guide

Содержание EX3200 Series































































































































































































































































































Результаты поиска

Содержание EX3200 Series

Отзывы:

Juniper EX3200 Series, Руководство по оборудованию, Страница: 70 / 310

Результаты поиска

Содержание EX3200 Series

Отзывы: