Juniper EX2200 Series, Руководство по оборудованию, Страница: 86 / 214

Figure 36: Securing the EX2200-C Switch Using Security Slots
g021160
Security slot
Security cable
Mounting an EX2200 Switch On or Under a Desk Using Screws
This topic applies only to the EX2200-C switch, the compact, fanless model.
You can mount an EX2200-C switch on or under a desk or other level surface by using
the flexible mounting slots on the bottom of the chassis to secure the switch.
Before mounting the switch on or under a desk or other lever surface:
•
Verify that the site meets the requirements described in “Site Preparation Checklist
for EX2200 Switches” on page 41 .
• Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
•
Read “General Safety Guidelines and Warnings” on page 176 , with particular attention
to “Chassis and Component Lifting Guidelines” on page 181 .
• Remove the switch from the shipping carton (see “Unpacking an EX2200 Switch” on
page 67 ).
NOTE: Do not block the vents on the top of the EX2200-C switches. Doing
this can lead to overheating of the switch chassis.
Ensure that you have the following parts and tools available:
• 3 desk mounting screws (M4 x 30mm or 8-32 x 1.25 in. Phillips pan-head machine
screws—not provided)
•
Phillips (+) screwdriver, number 2.
Copyright © 2018, Juniper Networks, Inc. 86
EX2200 and EX2200-C Switches Hardware Guide