Juniper EX2200 Series, Руководство по оборудованию, Страница: 71 / 214

Table 32: EX2200 Switch Mounting Methods
Comments Switch Model Mounting Method
On a desk or other level surface by using rubber feet provided with
the switch • EX2200
• EX2200-C
Desk or other level surface
(using rubber feet)
On or under a desk or other level surface by using screws EX2200-C Desk or other level surface
(using screws)
On two posts in a 19-in. rack or cabinet by using the mounting
brackets. • EX2200
• EX2200-C
Two-post rack or cabinet
• On four posts in a 19-in. rack or cabinet by using the separately
orderable four-post rack-mount kit
• On two posts in a 19-in. rack or cabinet by using the two post
rack mounting brackets.
• EX2200
• EX2200-C
Four-post rack or cabinet
In a position recessed 2 in. from the front of a 19-in. rack or cabinet
by using the 2-in.-recess front brackets in the separately orderable
four-post rack-mount kit. You can mount the switch in this recessed
position on two-post or four-post racks and cabinets EX2200 Recessed position
• On a wall by using screws or separately orderable wall-mount
kit
• On a wall by using screws
• EX2200
• EX2200-C
Wall mount
On or under a surface made of ferrous material using the separately
orderable magnet sheet EX2200-C Magnet mount
WARNING:
When mounting an EX2200 switch chassis in a vertical position, orient the
front panel of the chassis downward to ensure proper airflow and meet
safety requirements in the event of a fire. •
• When wall mounting EX2200-24P and EX2200-48P models, install the
wall-mount baffle above the units to reduce the risk of objects or
substances falling into the air exhaust or power supply, which could cause
a fire.
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm) apart so that
the switch can be mounted in any rack or cabinet that provides holes spaced at that
distance.
See the Related Documentation for detailed descriptions of the various rack or cabinet
mounting options.
Mounting an EX2200 Switch on a Desk or Other Level Surface
You can mount an EX2200 switch on a desk or other level surface by using the four rubber
feet that are shipped with the switch. The rubber feet stabilize the chassis.
71 Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration