Juniper BT8A78CH1, Обзор оборудования и руководство по установке

Страница: 157 / 228

Table 57: SFP+ 1310nm 10km Multi-Rate 9.9 to 11.1Gbps (BP3AM6MS) (continued)
Units Maximum Typical Minimum Parameter
dBm -10.3 – – Stressed receiver sensitivity (BER =
1e
-12
)
dBm – – 0.5 Receiver overload
dB 3.2 – – Optical path penalty(@ 6.6 ps/nm)
dB -12 – – Reflectance
Other
km 10 – – Reach
LC/Bail Connector/Latch type
Typical: 0.8 W
Maximum: 1 W
Power Consumption (40° ambient)
IEEE 802.3, Telcordia GR-253, ITU-T G.709, SFP+ MSA Compliance
Table 58: SFP+ DWDM Fixed 80km Multi-Rate 9.9 to 11.1Gbps (BP3AM6DL-xx Xx=[01,40])
Units Maximum Typical Minimum Parameter
Gbps 11.0957 – 9.953 Bit Rate
Transmitter
THz 196 – 192.1 Transmitter operating wavelength
dBm 3 – -1 Average operating power
nm 0.3 – – Spectral width (-20dB)
dB – – 30 Side mode suppression ratio
dB – – 8.2 Extinction ratio
dB 27 – – Optical return loss tolerance
Receiver
nm 1600 – 1260 Receiver operating wavelength
dBm – – 3 Receiver overload
157 Copyright © 2019, Juniper Networks, Inc.
Chapter 6: BTI7800 Series Transceiver Specifications