Juniper ACX5048 Скачать руководство пользователя страница 22

Страница: 22 / 217

Understanding Hardware Redundancy of an ACX5000 Router Components

and Functionality

The following hardware components provide redundancy on an ACX5000 router:

•

Power supplies—The ACX5000 router has one or two power supplies. Each power supply provides

power to all components in the router. If two power supplies are installed, the two power supplies

provide full power redundancy to the device. If one power supply fails or is removed, the second power

supply balances the electrical load without interruption.

To provide power redundancy to the system both power supplies must be installed. Connect power

source feed A to one power supply and power source feed B to the second power supply.

CAUTION:

Do not connect feed A and feed B to the same power supply input

terminal.

•

Cooling system—The 1 U ACX5048 router has five fan modules; the 2 U ACX5096 router has three fan

modules. If a fan module fails and is unable to keep the ACX5000 router within the desired temperature

thresholds, chassis alarms occur and the ACX5000 router can shut down.

Содержание ACX5048


























































































































































































































Результаты поиска

Содержание ACX5048

Отзывы:

Juniper ACX5048, Руководство по оборудованию, Страница: 22 / 217

Результаты поиска

Содержание ACX5048

Отзывы: