Juniper ACX5000, Руководство пользователя, Страница: 44 / 232

Table 8: Chassis Status LEDs on an ACX5000 Router
Description State Color Name
The router is halted or there is no alarm. Off Unlit ALM–Alarm or beacon
A major hardware fault has occurred, such
as a temperature alarm or power failure,
and the router has halted. Power off the
ACX5000 router by setting the AC power
source outlet to the OFF (
O
) position, or
unplugging the AC power cords. Correct
any voltage or site temperature issues,
and allow the router to cool down. Power
on the ACX5000 router and monitor the
power supply and fan LEDs to help
determine where the error is occurring.
On steadily Red
A minor alarm has occurred, such as a
software error. Power off the ACX5000
router by setting the AC power source
outlet to the OFF (
O
) position, or
unplugging the AC power cords. Power on
the ACX5000 router and monitor the
status LEDs to ensure that Junos OS boots
properly.
On steadily Amber
The router is powered off or halted. Off Unlit SYS–System
Junos OS for ACX Series is loaded on the
router. On steadily Green
The router is a linecard member. Off Unlit MST–Master
The router is a standalone router. On steadily Green
The beacon feature is not enabled on the
router. This feature is enabled using the
request chassis beacon command.
Off Unlit ID–Identification
The beacon feature is enabled on the
router. This feature is enabled using the
request chassis beacon
command.
Blinking Blue
Related
Documentation
Management Panel of an ACX5000 Router on page 17
•
•
show chassis alarms
•
request chassis beacon
Management Port LEDs on an ACX5000 Router
The management ports (labeled C0 for 10/100/1000 Base-T and C1 for 10/100/1000
Base-T and SFP 1000 Base-X connections) on an ACX5000 router have two LEDs that
Copyright © 2015, Juniper Networks, Inc. 24
ACX5048 and ACX5096 Universal Access Router