Jungheinrich ESE 533, Руководство по эксплуатации

Страница: 56 / 133

3.4 Preparing the truck for operation
Switching on the Industrial Truck
Requirements
– For checks and operations to be performed before starting daily operation, see
page 49.
Procedure
• Sit on the driver's seat.
• Close the door.
Z
Because of the seat and door switch function the truck can only be operated when
the seat is occupied and the door closed.
• Turn the Emergency Disconnect switch (8) to unlock it.
• Switch on the truck, to do this
• Insert the key in the key switch (7) and turn it as far right as it will go.
• Enter the code in the code lock (
o
).
• Hold the card or transponder in front of the ISM access module and depending
on the setting press the green button on the ISM access module (
o
).
• Test the warning signal button (57).
The truck is operational.
56
02.21 en-GB