Jungheinrich ESD 220 Скачать руководство пользователя

Страница: 49 / 186

Exposing the battery

WARNING!

An unsecured truck can cause accidents

Parking the truck on an incline or with a raised load handler is dangerous and is
strictly prohibited.

Park the truck on a level surface. In special cases the truck may need to be
secured with wedges.

Fully lower the load handler.

Select a place to park where no other people are at risk of injury from the lowered
load handler.

If the brakes are not working, place wedges underneath the wheels of the truck to
prevent it from moving.

CAUTION!

Trapping hazard

Make sure there is nothing between the battery cover and the truck when you fit
the battery cover.

Requirements

– Park the truck on a horizontal surface.
– Park the truck securely, see page 67.

Procedure

• Fold up the arm rest (13).

The battery connector (52) and battery
retainer (51) can be accessed

10.19 en-GB

Содержание ESD 220



























































































































































































Результаты поиска

Содержание ESD 220

Отзывы:

Похожие инструкции для ESD 220

Бренды по названию

Популярные бренды

Jungheinrich ESD 220, Руководство по эксплуатации

Результаты поиска

Содержание ESD 220

Отзывы:

Похожие инструкции для ESD 220

Бренды по названию

Популярные бренды