Jungheinrich AMW 22 Скачать руководство пользователя

Страница: 106 / 112

Lubricants and Lubrication Schedule

4.1

Handling consumables safely

Handling consumables

Consumables must always be handled correctly. Follow the manufacturer’s
instructions.

WARNING!

Improper handling is hazardous to health, life and the environment

Consumables can be flammable.

Keep consumables away from hot components and naked flames.

Always keep consumables in prescribed marked containers.

Always fill consumables in clean containers.

Do not mix up different grades of consumable. The only exception to this is when
mixing is expressly stipulated in the Operating Instructions.

CAUTION!

Spilled consumables can cause slipping and endanger the environment

Risk of slipping from spilled consumables. The risk is greater when combined with
water.

Do not spill consumables.

Spilled consumables must be removed immediately with an appropriate bonding
agent.

The bonding agent / consumable mixture must be disposed of in accordance with
regulations.

106

11.19 en-GB

Содержание AMW 22

















































































































Результаты поиска

Содержание AMW 22

Отзывы:

Похожие инструкции для AMW 22

Бренды по названию

Популярные бренды

Jungheinrich AMW 22, Руководство по эксплуатации

Результаты поиска

Содержание AMW 22

Отзывы:

Похожие инструкции для AMW 22

Бренды по названию

Популярные бренды