Jungheinrich AMW 22, Руководство по эксплуатации

Страница: 102 / 112

5 Troubleshooting
This chapter enables the user to locate and rectify basic faults or the results of
incorrect operation on his own. When trying to locate a fault, proceed in the order
shown in the table.
Z
If the industrial truck cannot be restored to operational status after carrying out the
following remedial operations, contact the manufacturer’s service department.
Additional troubleshooting must only be performed by the manufacturer’s specialist
service engineers. The manufacturer has a service department specially trained for
these tasks.
In order for customer services to react quickly and specifically to the fault, the
following information is essential:
- Truck serial number
- Error description
- Current location of truck.
5.1 Load cannot be lifted
Possible Cause Action
Handle in the wrong position Push handle into “H” position
Excessive load Note maximum capacity, see data plate.
102
11.19 en-GB