junger T-AP, Руководство пользователя, Страница: 4 / 68

Rev. 130906
T*AP
hardware features
• 1RU Base Unit compact 19" processing device with front side controls and displays
• 1RU Remote Panel detachable panel with case, powered by POE (Power Over Ethernet)
• 4x 2 channel audio delay up to 2sec.delay time each
• Dolby® decoder built in optional Dolby® E or D or D+
• Dolby® encoder built in optional Dolby® E or D or D+ or AAC or HE-AAC
• Dolby® metadata I/O two RS485 9-pin Sub-D connectors
• 4x AES3id I/O + SRC on board AES I/O with relay bypass and SRC (selectable) per input
• Two interface slots expansion slots for optional I/O boards : 3-G/HD/SD-SDI, AES, analog
• RJ45 POE connector for connecting the X*AP Remote Panel
• RJ45 network connector 100BaseT full duplex Ethernet interface
• USB connector built in USB < > serial adapter to access the service port
• 8x GPI balanced inputs on 25pin Sub-D
• 8x GPO relay change over contacts on 25pin Sub-D
• Aux power supply isolated 5V supply for external GPI/O wiring
• External sync IN BNC input (Word Clock, AES, Black Burst, Tri-Level)
• Sync OUT BNC Word Clock output
software features
•
8 channel LevelMagic™ Junger Audio level, loudness and limiter control algorithm
• 5.1 Upmix Junger Audio upmix algorithm
• Downmix stereo downmix from 5.1 source
• Filter HP/LP filter, 5x parametric EQ, SpectralSignature
• Voice Over manual or automatic ducking functions
• Fail Over switching of alternative signals to maintain audio for a specific program
• Delay separate delay for each processing channel up to 2000 ms.
• Dynamics compressor / expander
• Monitor to check paths inside the DSP processor, separate downmix
• SNMP agent SNMP v1 get (no set) and configurable traps (see TAP-MIB)
• EmBER protocol supports the l-s-b Ember and Ember+ protocol for VSM integration,
and 3
rd
party API
operating manual