Activate/deactivate permanent LED operation
The status LED lights up with reduced brightness during the active heating or cooling
phase.
￭
Press the control knob for longer than 10 seconds until the LED lights up or
flashes in the colour magenta.
LED lights up magenta = permanent operation is active
LED flashes magenta = permanent operation is inactive (default setting)
￭
Press the control knob briefly to switch the mode.
￭
Press the control knob for more than one second or wait 10 seconds to adopt
the displayed mode.
7
Information for electrically skilled persons
Selecting a suitable installation location
–
Recommended installation height: 1.50 m on interior walls
–
Do not mount the device near sources of interference, such as ovens, refriger-
ators, draughts (e.g. next to the door) or direct sunlight. This affects the tem-
perature measurement of the internal temperature sensor.
–
Do not mount the device within shelf walls or behind curtains and similar cov-
ers
–
Do not use the device in multiple combinations with heat-generating devices
such as dimmers
DANGER!
Mortal danger of electric shock.
Disconnect the device. Cover up live parts.
Room thermostat (heating/cooling) 24 V
7 / 12
82405003
16.09.2022
J0082405003