![Jung MR-SONOS-REG Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/jung/mr-sonos-reg/mr-sonos-reg_product-manual_2031704007.webp)
About this documentation
KNX Sonos -Gateway
MR-SONOS-REG
© 2019 Albrecht J ung GmbH & Co. KG
p. 7 / 118
1
About this documentation
This documentation will accompany you through all phases of the product life cycle of KNX Sonos Gateway.
You will learn for example how to assemble, install, commission and configure the device.
All descriptions in this documentation relating to configuration in the ETS refer to the variant "ETS Professio n-
al" in the 5 version.
Explanations for the concepts of KNX do not form part of this documentation. Specialist knowledge of KNX is
a prerequisite.
1.1
Target group
This documentation is aimed at qualified electricians and KNX processors.
KNX Sonos Gateway may only be assembled and installed by qualified electricians. Specialist
knowledge of KNX is a prerequisite.
KNX Sonos Gateway may be configured by anyone.
We recommend having the project planning done by a system integrator with firm specialist
knowledge of KNX and using the ETS.
1.2
Symbols and other typographical conventions
Table 1: Safety notes symbols
Symbol / label
Meaning
Warning of possible material damage
General warning
Warning of electrical voltage
Table 2: Special symbols and typographical conventions
Symbol / label
Meaning
F1
PC button
<<Inscription>>
Text on software interface
Tip
Important additional information
Troubleshooting, error correction and tips on causes
End device: Sonos loudspeaker – referred to as "Sonos device" in
this documentation