Motion detector mini basic
(3)
Terminal
(4)
Motion detector
(5)
Design ring
The environment in the suspended ceiling must be dry.
Max. thickness of the suspended ceiling approx. 25 mm. Installation depth min. 35 mm. Dis-
tance between concrete ceiling and suspended ceiling min. 20 mm (Figure 2).
￭
Create ceiling cut-out Ø 44...45 mm(Figure 2).
Connecting the device
Figure 3: Clampable conductor cross-section
Recommended line J-Y(St)Y 2×2×0.8 (2 wire pairs, conductor diameter 0.8 mm this corres-
ponds to a conductor cross-section of 0.5 mm²).
For the cable length, also observe the information in the instructions for the device to be con-
nected.
￭
Use the unchoked output of a KNX power supply or power supply unit with safety extra-
low voltage as power supply.
￭
Connect the connection cable to device connection terminal (3) (Figure 2).
Connection in general
Terminal assignment of motion detector
Terminal
Connection
DC24V +
Power
DC24V –
Power supply GND
A+
Switching
A–
Switching output –
Figure 4: Connection in general
For connection diagrams for various KNX devices, see accessories
Figure 5: Connection to Multi station
3 / 6
82403103
29.09.2020
J0082403103