Jung LB management, Руководство пользователя

Страница: 49 / 196

4. Plug the attachment in to the associated insert or alternatively reset the attachment by simul-
taneously pressing and holding the operating buttons for switching, moving or dimming for
longer than 4 seconds (e.g. press and hold “Up” and “Down” simultaneously).
3.6 Backwards Compatibility
The following principles apply if buildings are equipped with the “Lighting Management” and
“Blind Management” systems and should now be modernised using components from the new
LB Management system:
− Installation buttons as satellite unit can be maintained without change.
− 2-wire Lighting Management satellite units (attachment and insert) can be maintained
without change.
− 3-wire Lighting Management satellite units can no longer be used and must be replaced
with inserts and attachments from the new LB Management system. The master units must
also be replaced with master units from the LB Management system.
− Inserts and attachments must always be from the same system.
− Existing device combinations (insert and attachment) in an existing Blind Management
system can be replaced with individual LB Management combinations.
EQUIPMENT OVERVIEW 49