Jung LB management, Руководство пользователя

Страница: 185 / 196

OPERATION 185
8.2.5 eNet Standard Radio centre plate
The eNet Standard Radio centre plate has two buttons and the eNet Radio centre plate has four
buttons, which are used for local operation.
With the eNet Standard Radio centre plate , you control light and shade by pressing a button.
The button reacts on the full surface and in particular makes the switching of light using the
toggle function particularly simple: The light goes on by pressing a button at any place and off
again by pressing on the switch again.
With the eNet Radio centre plate , the left rocker takes on the toggle function (on/off) which, as
with the Universal centre plate as well, is carried out by a short press at the top or bottom.
The right button of the centre plate extends the centre plate by the lock function (top) and the
memory function (bottom). Pressing and holding the lock function deactivates all automatic
functions, memory mode and disables satellite unit operation. However, you can continue to
operate the left button half when the lock function is activated.
Activate the memory function by pressing and holding this. Previously saved switching
operations are repeated in a 24 hours cycle in the memory function.
Press the right top and bottom button simultaneously, activate the night mode, in which both
LEDs do not light continuously but only for five seconds.
Press and hold the memory button and the desired function button (On/Off, Brighter/Darker,
Up/Down) simultaneously to save the memory function. A successful save is signalled by the LED.
The eNet pairing mode is activated by pressing and holding the left rocker.
ENET STANDARD RADIO CENTRE PLATE
Press and hold:
brighter, move up
Press and hold:
darker, move down
Press and hold:
save settings;
Activate mix-up protection,
factory reset,
eNet pairing mode
Briefly press at
any place:
toggle (On/Off)