Jung LB management, Руководство пользователя

Страница: 174 / 196

174 OPERATION
8. Operation
Light and shading can be manually controlled easily and intuitively by pressing a button with the
Standard and Universal Centre Plates. The Standard and Universal Timer attachments are avail-
able for programmed control.
8.1 Manual control
8.1.1 Standard centre plate
You control light and shade manually by pressing a button with the Standard centre plate. The
button reacts on the full surface and in particular makes the switching of light using the toggle
function particularly simple: The light goes on by pressing a button at any place and off again
by pressing on the switch again. The Standard centre plate can also be operated with your
elbow if you have your hands full. In combination with a dimming insert, the lighting can also
be dimmed. Pressing and holding the top half of the button dims the lighting brighter; pressing
and holding the bottom half of the button dims the lighting darker.
You also control the shading by pressing and holding the button. Pressing and holding the top
half moves the blind up; pressing and holding the bottom half moves the blind down. If you have
set up a ventilation position, the blind first stops in this position and then continues down to the
specified lower limit position after pressing and holding the button again.
If a Standard 2-gang centre plate is used, the operation of the left and right rocker is identical.
The Standard centre plate is also available without arrow symbols.
Press and hold:
brighter, move up
Press and hold:
darker, move down
Press and hold:
save settings
Briefly press at
any place:
toggle (On/Off)