Jung LB management, Руководство пользователя

Страница: 137 / 196

TEMPERATURE
The evaluation of the temperature and brightness values is not performed in the brightness /
temperature sensor but in the devices paired via Bluetooth.
You specify a threshold for the temperature using the Clever Config app. The setting range of the
threshold is 5 – 50 °C and also has an Off position. The brightness function is executed if the
brightness threshold specified in the sun protection function and the configurable temperature
threshold are now exceeded. However, the function is not executed if only the brightness thresh-
old is exceeded and the temperature threshold remains in the defined range. In this case, the
temperature continues to be monitored precisely so that the brightness function can be executed
immediately as soon as the temperature is exceeded.
Note that the measured temperature on a window pane can be different from the actual room
temperature.
5.8.2 Bluetooth brightness / temperature sensor
The Bluetooth brightness / temperature sensor is a battery-powered device and therefore has no
interfering cable. Using an adhesive pad, it can be fixed very easily and without tools on the
interior side of any window pane. The Bluetooth brightness / temperature sensor has a wireless
range of up to 10 metres in closed rooms.
The sensor measures the brightness and temperature values and sends the currently measured
values to the Universal Timer Bluetooth. Depending on the recorded actual values and the
specified values, the Universal Timer Bluetooth executes the sun protection or twilight function
to move the blinds to a defined position or switch on the lighting.
Temperature-dependent shading is started by the Universal Timer Bluetooth if any temperature
change of more than one degree occurs. For example, a winter garden can be automatically
shaded as soon as a previously defined temperature is exceeded in order to prevent the winter
garden heating up too strongly.
You can make all settings of the Universal Timer Bluetooth in the Clever Config app. You can also
read out all current temperature and brightness values in the app, and as a result know at any
time whether the values are within the defined limits and whether any threshold will soon be
exceeded or undercut.
Note that the brightness / temperature sensor does not take over the evaluation of the recorded
values. This continues to be done in the devices paired via Bluetooth.
5.8.3 Coupling sensors to the Universal Timer
The serial number is located on the brightness / temperature sensor. The Universal Timer and the
brightness / temperature sensor are connected with each other using the Clever Config app by
the entry of the serial number. Each Universal Timer Bluetooth can only work together with one
sensor.
LB MANAGEMENT SHADING 137