Room controller display compact module
–
Measurement and feedback control of the room temperature
–
Mounting in appliance box according to DIN 49073
Product characteristics
All buttons can be assigned with push-button sensor functions or functions for controller opera-
tion.
–
Four red status LEDs
–
A blue operation LED as an orientation light and to indicate the programming status
–
Integrated bus coupling unit
–
Completion with set of buttons (see accessory)
–
Connection of push-button extension module for expansion to include four additional but-
tons
–
Integrated room temperature sensor
–
Room temperature control with setpoint value specification
–
Indication of room or setpoint temperature
–
Indication of outdoor temperature – with external sensor, e.g. weather station
–
Indication of time, in conjunction with KNX time encoder
–
The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling
up moods, etc.
–
Button function or rockers function, vertical or horizontal
4
Operation
Operating a function or load
Depending on the programming, a button can have up to three functions assigned to it – upper/
left, lower/right, entire surface. Operation depends on the specific function.
￭
Switch: Short press on button.
￭
Dim: Long press on the button. The dimming process ends when the button is released.
￭
Move Venetian blind: Long press on button.
￭
Stop or adjust Venetian blind: Short press on button.
￭
Call up light scene: Short press on button.
￭
Save light scene: Long press on button.
￭
Set value, e.g. brightness or temperature setpoint: Short press on button.
Operating modes and display icons
The device compares the current room temperature with the setpoint temperature and controls
heating or cooling devices according to the current demand. The setpoint temperature depends
on the current operating mode and can be changed by the user, depending on the program-
ming. The operating modes and the current controller status are shown in the display.
–
ó
: Operating mode Comfort
–
ô
: Operating mode Standby
–
õ
: Operating mode Night
–
ö
: Operating mode Frost/heat protection
The
ö
icon flashes if the room temperature drops below 5 °C / 41 °F.
–
÷
: Display dewpoint operation; controller blocked
–
óõ
: Comfort extension, night
–
óö
: Comfort extension, frost protection
–
ìí
...
ê
: Fan controller with fan level display.
ë
= Fan off.
–
µ
: Manual fan control
–
ÝÞ
...
â
: Heating mode with display of the heating stage
–
ãä
...
è
: Cooling mode with display of the cooling step
–
¹
: Indoor temperature
2 / 7
32573243
16.04.2020
J:0082573243
