Universal dimming actuator, 1-gang
–
Updateable with Jung ETS Service App
Dimming operation characteristics
–
Automatic or manual selection of the dimming principle suitable for the load
–
Protected against no-load, short-circuit and overheating
–
Signal in the event of a short-circuit
–
Feedback of the switching position and the dimming value
–
Parameterisable switch-on and dimming behaviour
–
Time functions: switch-on delay, switch-off delay, staircase lighting timer with run-on time
–
Light scene operation
–
Operating hours counter
–
Mains failure longer than approx. 5 seconds leads to switch-off of the dimming actuator.
Depending on the parameter setting, the connected load is calibrated after resumption of
power supply.
–
Power extension possible by means of power boosters.
Delivery state: Operation of the output via extension inputs 1 and 2 possible with existing
supply via KNX.
Flickering of the connected lamps due to undershoot of the specified minimum load or
through centralised pulses from the power stations. This does not represent any defect in
the device.
Characteristics extension inputs
–
Switching operating function
–
Dimming operating function (incl. colour temperature dimming)
–
Shutter/Venetian blinds operating function
–
Value transmitter operating function (1-byte, 2-byte, 3-byte and 6-byte incl. RGBW and
colour temperature presets)
–
Scene extension operating function
–
2-channel operation operating function
–
Controller extension operating function
–
Disabling functions
–
Debounce time adjustable
Logic function characteristics
–
logic gates
–
Transformer (conversion)
–
Disabling element
–
comparator
–
Limit value switch
4
Information for electrically skilled persons
DANGER!
Mortal danger of electric shock.
Disconnect the device. Cover up live parts.
3 / 10
82404403
02.02.2021
J0082404403
