KNX
4-/8-channel switching actuator 16A
4-/8-channel switching actuator 16A / C-load
Art.-Nr.: 230x.16 REGHM, 230x.16REGCHM
Operation Instructions
4-/8-channel switching actuator 16A
4-/8-channel switching actuator 16A /
C-load with current detection
1. Safety instructions
Electrical equipment must be installed and fitted by qualified
electricians only. Observe the current accident prevention
regulations. Failure to observe the instructions may cause damage
to the device and result in fire or other hazards. The device is not
suited for safe disconnection of the mains supply. Do not connect
mains voltage consumers together with SELV/ PELV consumers to
the same switching actuator. Do not connect three-phase AC
motors to the actuator. The current detection and load monitoring
functions must not be used for safety-related applications, e.g.
overload detection. These operating instructions are part of the
product and must be left with the final customer.
2. System information
This device is a product of the KNX-system and complies with KNX
directives. Technical knowledge obtained in KNX training courses is a
prerequisite to proper understanding. The functionality of this device
depends on the software. Detailed information on loadable software and
Stand: Mai-07
825 603 03