KNX Home
weather
station
Ref.-no.:
2224
WH
Operating Instructions
Home weather station
1.
Safety instructions ............................................................................ 1
2.
Device layout ..................................................................................... 2
3.
Function ............................................................................................. 2
3.1.
System information ....................................................................... 2
3.2.
Designated use ............................................................................. 2
3.3.
Product features............................................................................ 2
4.
Fitting and electrical connection ..................................................... 3
4.1.
Installing the device ...................................................................... 3
4.2.
Aligning the device........................................................................ 4
4.3.
Opening the device ....................................................................... 4
5.
Start-up............................................................................................... 4
6.
Technical data ................................................................................... 5
7.
Accessories ....................................................................................... 5
8.
Guarantee........................................................................................... 6
1. Safety instructions
Electrical equipment must be installed and fitted by qualified
electricians only. Failure to observe the instructions may
cause damage to the device and result in fire or other
hazards. Do not operate the device in the vicinity of
chimneys or other exhaust or ventilation structures Do not
operate the device close to radio transmitters. Choose the
place of installation in such a way that the device is
accessible for servicing purposes. Do not open the sensor
head. Do not make inscriptions or stick labels on the sensor
head. Clean the underside of the sensor head with a soft
brush only. These operating instructions are part of the
product and must be left with the final customer.
Stand: Jan-08
825 628 03
