Switch actuators flush mounted – 1gang 16A, 2gang 6A
Switch actuator, 1-gang
Art. No. 2131.16 UP
Switch actuator, 2-gang
Art. No. 2132.6 UP
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock on the KNX installation. Do not connect any external voltage to
the inputs. Doing so may damage the device(s), and the SELV potential on the KNX bus
line will no longer be available.
Danger of electric shock. Before working on the device or before exchanging light bulbs,
disconnect mains voltage and switch off circuit breakers.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Switch actuator 1gang
1/6
82553923
J:0082553923
18.09.2012
