Jung J630D, Руководство пользователя

Страница: 39 / 316

J630D
2. Technical data / transportation / commissioning 26.7.02 33
2.5 Transport instructions
Set the machine down on two wooden beams (minimum dimensions 6.7 x 6.7 x
39.4) after it has been transported to its destination and screw the four levelling
screws into the machine bed from underneath.
• The machine is only allowed to be transported by trained persons
who have also received special instruction. The utmost diligence
and conscientiousness are essential when transporting the
machine.
• Do not stand underneath suspended loads.
• Suitable protective equipment, such as a helmet and safety shoes,
must be worn at all times.
• All national statutory requirements must be observed when the
machine is transported (e.g. accident prevention regulations)!
• Drain off all liquids (e.g. coolants and oils) before transporting the
machine).
• The machine must always be suspended straight.
• Avoid vibrations and shocks when transporting the machine, and
take steps to prevent the load from swinging freely.
• Always reduce the speed before raising or lowering the load.
• The load must always be lowered onto a level, horizontal surface.
This surface must be capable of supporting the weight of the
machine.
• The chains must not be allowed to touch any part of the machine,
because of the risk that it may be damaged or tilted.
• Study and heed the original instructions provided by the manufac-
turer before transporting accessories or other items of equipment
(e.g. coolant systems, extraction devices, etc.).