Jung J630D, Руководство пользователя

Страница: 19 / 316

J630D
1. Safety 26.7.02 13
1.2 Use for the intended purpose
The surface and profile grinding machine is a machine tool which is installed at a
fixed location (stationary grinding machine). It is designed solely for machining
workpieces with suitable grinding wheels. The grinding wheel and the workpiece
are continuous path-controlled, in other words the grinding process is positively
guided. The workpieces must be secured in position on the machine table using
suitable clamping devices, and appropriate steps taken to prevent them from mo-
ving, slipping or flying off. Failure to take such precautions means you run the risk
of the grinding wheel bursting as a result of workpieces toppling over or flying off.
In addition, workpieces or wheel fragments may be catapulted out of the machi-
ne's working envelope.
'Use for the intended purpose' also includes:
– Careful attention to the instructions contained in the Operating Instructions,
and in particular to all other information provided in the safety section and
on the machine's safety plates.
– Compliance with all national and international safety and protection regula-
tions, standards, codes of practice and statutory requirements applicable to
activities of any kind on or with the machine.
– Observance of all servicing and maintenance intervals.
All other forms of use which deviate from the above, and in particular failure to
heed the information contained in the Operating Instructions or comply with the
statutory requirements for machine owners as well as with any other safety regu-
lations, are considered to be contrary to the intended purpose.
Dressing the grinding wheels with a manually guided diamond is not considered
to be in accordance with the intended purpose of the machine.
Workpieces must not under any circumstances be positioned at the grinding
wheel by hand, for example in order to grind the edges as with a grinding pedestal
.
Misuse or use contrary to the intended purpose can result in either
the machine itself and/or products in its vicinity being damaged or
destroyed. Personal injury or, in extreme cases, death may ensue if
the danger zone around the machine is not kept clear.
No liability for injuries to persons or damage to property of any kind
will be assumed by the manufacturer if the machine:
• is not used in accordance with its intended purpose,
• is not maintained correctly or adequately,
• is not operated correctly,
• is operated or used by persons without suitable qualifications,
is not operated in accordance with the safety instructions contained
in this section and in the other relevant sections of the Operating
Instructions.