Power DALI potentiometer insert
Power DALI potentiometer insert
Art.-No.: 240 PDPE
Operationsmanual
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
picture 1
(1) DALI potentiometer
(2) Frame
(3) Central plate
(4) Control knob
(5) Screw terminals
3 Function
Intended purpose
-
Brightness setting for luminaires with DALI interface
-
Installation in appliance box to DIN 49073
-
Observe the technical data.
Product characteristics
-
If mains voltage is connected to the device "= active operation", it supplies the control
current for 26 DALI subscribers.
-
If no mains voltage is connected "= passive operation", then the device is powered using
the DALI voltage and serves as an additional control section.
-
Parallel switching of up to four "active" DALI potentiometers with the option of supplying up
to 104 DALI subscribers.
-
All the control sections have the same functionality.
-
Saving of a basic brightness and a fixed switch-on brightness.
1/4
82563213
J:0082563213
06.05.2010
