Temperature Management
Hygrostat
Ref.-no.:
..5201
HYG..
4.5. Switching back to automatic mode
•
Press the mode-of-operation selector longer.
After abt. 5 s, the hygrostat switches back to the automatic mode of
operation.
LED
yellow:
off
, LED
green:
off
, LED
red:
off
L
When the relay is switched on in the automatic mode, the green LED
is on.
4.6. Cleaning the hygrostat
Clean the hygrostat housing with a wet cloth.
L
Do not use detergents.
L
After cleaning, the hygrostat may temporarily measure higher
humidity values.
Information for qualified electricians
DANGER!
Electric shock in case of accidental contact with live parts. Electric
shocks can be fatal.
Before working on the device, cut out the mains supply and cover
up live parts in the surroundings.
5. Fitting and electrical connection
5.1. Fitting and connecting the device
The device consists of the insert and the attachment module (Fig. 4).
Fig. 2: Electrical connection
Do not install the hygrostat together with other electrical devices in the
same combination since the heat produced by these devices may have
an influence on the temperature measurement of the hygrostat.
5