Push-button controller, built-in
Light Management
Push-button controller, built-in
Art.-No.: 240-10 EB
Operationsmanual
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
picture 1: Device components
(1) Control unit
(2)
Basic brightness
adjuster
(3)
Memory
adjuster
(4) 1-10 V interface
3 Function
Intended use
-
Brightness setting for lamp operating devices with 1-10 V interface
-
Installation in false ceilings or surface mounting
Product characteristics
-
The light bulb is switched on and off via the load cable and dimmed via the 1-10 V
interface.
-
Operation via installation button, NO contact
-
Can be switched to memory function with brightness memory
-
The 1-10 V interface is short-circuit proof for the control current.
1/5
82515713
J:0082515713
13.08.2010