Switch actuator
Switch actuator, 2-gang
Art. No. 2302.16 REG HM
Switch actuator, 4-gang
Art. No. 2304.16 REG HM
Switch actuator, 8-gang
Art. No. 2308.16 REG HM
Switch actuator, 4-gang, C-load
Art. No. 2304.16 REG C HM
Switch actuator, 8-gang, C-load
Art. No. 2308.16 REG C HM
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock on the SELV/PELV installation. Do not connect loads for mains
voltage and SELV/PELV together on a single switch actuator.
Do not connect any three-phase motors. Device can be damaged.
Do not use the current detection and load monitoring functions for safety-related
applications e.g. overload detection.
For the outputs, use circuit breakers for the respective rated current. Device can be
damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: View of switch actuator 4gang
(1) Slide switch/Status indication
(2) Programming button and LEDs
(3) KNX connection
(4) Connection of relay outputs
1/8
82560323
J:0082560323
03.09.2013