o
Press extension.
Output
Kanal 1
switches on.
When the switch-on delay for output
HLK
is switched off, output
HLK
switches on directly.
When the switch-on delay for output
HLK
is switched on, output
HLK
switches on after a
time delay of 3 minutes, if no additional motions are detected for approx. 2.5 to 3 minutes
after the extension is operated.
Switching off in combination with motion detector or presence detector
i
Combination with motion detector: outputs cannot be switched off.
i
Combination with presence detector: the output
HLK
cannot be switched off.
Outputs are switched on.
o
Press extension.
Output
Kanal 1
switches off for 3 minutes. Any motions that are detected extend the time.
During these 3 minutes output
Kanal 1
can only be switched on again via the extension.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Connecting and mounting the insert
picture 2: Connection diagram with optional extensions
(1) Flush-mounted insert
(7) Extension insert, 2-wire
(8) Extension insert, 3-wire
(9) Installation button, NO contact
i
Outputs
Kanal 1
and
HLK
are not protected internally. For device protection, connect a
10 A miniature circuit breaker upstream.
3/6
32541323
J:0082541323
30.07.2010
Light Management
Relay switch insert 2-channel