Junction Rapid-E, Руководство пользователя

Страница: 18 / 21

17
Remove the battery and wash your bicycle
with water and mild soap. Do not use a
high-pressure water hose to prevent
water
from getting inside the
components.
Make sure to keep the battery unit
contact prongs and holders clean. Use a
damp cloth to remove grit, dust, mud, etc.
Storing your power assisted bicycle
A discharged battery stored for a long
period can be permanently damaged. To
prevent such a situation, the following
should be observed when storing your
power assisted bicycle for a long period:
▪
Charge the battery to around 75% of full
capacity
▪
Remove the battery from the bicycle
▪
Store the battery in a dry, tempered
room away from humidity at room
temperature (around 20°C).
▪
Check battery charge after 6 months of
storage and charge to around 75%
again.
Do not store the battery in a cold
environment, even for a short period.
If you must leave or store your power
assisted bicycle outside or in a place that is not
heated, you should remove the battery and store
it inside, at room temperature. Cold temperature
can damage the battery.
Store the battery away from high heat
sources such as direct sunlight or
inside a vehicle during summer.
Do not leave the battery unit
connected to the charger for long
periods besides the normal charging
period.
Disposal
Check with your local waste management
services for the proper way to dispose of
the components of the Power assist
system. Do not dispose of these
components with other household waste.
Check for a local battery recycling
program to dispose of the battery.