11
Travelling Speed (Km/H)
0-20
Standards
GB 10395.1-2009
GB 10395.6-2006
GB/T 24677.1-2009
Part 4 Usage and operation
When the machine is working, the working slope is ≤11° and it is not allowed to operate when the
slope is larger than the specified range, so as to prevent rollover.
1.Start-up and shutdown:
1.1.Start up (the configuration of gasoline engine is shown in Fig.2, please refer to the operation
manual of gasoline engine for details).
Fig 2: Outline structure diagram of gasoline engine
Before starting the gasoline engine, make sure that the oil circuit and circuit are connected, the
transmission lever is in neutral position, and the diaphragm pump clutch is in the separation state.
1.1.1.Pull the choke switch to the "off" position, as shown in Fig.3.
1.1.2.Insert the starting key into the ignition switch, turn the "off" position to the "on" position and
turn on the power supply. Then turn the key to the "start" position and hold it for about 5 seconds to
start the engine. After the engine starts, the start key will quickly return to the "on" position (as
shown in Fig.4).
(Note: the electric starter should not be used for more than 5 seconds each time. If the engine cannot
be started, the ignition switch key must be released and the engine can be started after 10 seconds.)
