JUMP SNAP
The Ropeless Jump Rope!
Instruction Manual
LCD DISPLAY [Illustration of LDC display and buttons of operation]
OPERATION:
Turn ON - PRESS and HOLD the MODE/ON key and DOWN key
simultaneously for 3 seconds.
Turn OFF – It shuts off automatically after 3 minutes of idle time.
1. User Profile (Recommended): Press MODE/ON key, "NO. 1" icon is
flashing, press UP or DOWN key to choose user 1 or 2, then press SET
key to confirm.
[Illustration showing close up of user profile display]
2. Height (Recommended): Press MODE/ON key, field displays "FT IN",
press SET key so Feet Position icon is flashing, then press UP or DOWN
key to adjust feet. Press SET key so Inches Position icon is flashing,
then press UP or DOWN key to adjust inches. (Default height: 5 feet)
[Illustration showing close up of height display]
3. Weight (Recommended): Press MODE/ON key until "WT" icon
displays, press SET key, then press UP or DOWN key to adjust weight
(Default weight: 150 lbs, weight range 0 – 330 lbs)
[Illustration showing close up of weight display]
4. Target Jumps Alert (Optional): Press MODE/ON key until display "T1",
then press SET key, thousandths digit and hundredths digit are
flashing, press UP or DOWN key to adjust and then press SET key to
confirm. Repeat for tenths digit and ones digit while flashing, using UP
or DOWN key to adjust, then press SET key to confirm. When the user
reaches their target number of jumps, the unit will alert the user with a
"beep beep" sound.
[Illustration showing close up of target jumps alert display]
5. Target Jump Time Alert (Optional): Press MODE/ON key until lower
right LCD displays "T2", then press SET key causing minutes to flash,
press UP or DOWN key to adjust. Then press SET key, causing the
