JUMO LOGOSCREEN Series, Руководство по установке

Страница: 5 / 32

5
1 Introduction
1.1 Preface
Please read these Installation Instructions before commissioning the instru-
ment. Keep the instructions in a place that is accessible to all users at all
times.
Please assist us to improve these installation instructions, where necessary.
Your suggestions will be appreciated.
H
If any problems should occur during commissioning, please do not
carry out any manipulations on the unit, as this could endanger
your rights under the instrument warranty!
Please contact the nearest subsidiary or the head office in such a
case.
E
When returning modules, assemblies and components, the regula-
tions of EN 61340-5-1 and EN 61340-5-2 “Protection of electronic
devices from electrostatic phenomena” must be observed. Use
only the appropriate ESD packaging for transport.
Please note that we cannot accept any liability for damage caused
by ESD (electrostatic discharge).
B