JUMO LOGOSCREEN 550 cf, Руководство по эксплуатации

Страница: 78 / 138

5 Setup program
78
5.2 Installation
Run the
installation
program
h
Start Microsoft Windows
h
Insert the CD into the drive, then close the drive.
After the CD has been inserted, the installation program will start
automatically. If not, proceed as follows:
h
Start the file “Launch.exe” in the main directory of the CD.
The installation program will lead you through the rest of the installation with
screen messages.
Program start
h
Start the setup program by selecting the entry “Setup program ...“ in the
chosen program folder.
When the software has just been installed for the first time, there will not yet be
a query of the user name and password. In the menu Extras, the query at the
start of the program can be activated by the function Renew log-in / Alter
password.
The activation of the log-in function can be used to distinguish between the
user types “Specialist” and “Maintenance”. These two users have different
access rights with regard to the functions in the setup program.
v
“Renew log-in / Alter password” on page 101
v
Chapter 6 “Rights”
If the query is active, proceed as follows:
h
Log in.
H
If Microsoft Windows has already been started, all Windows
programs must be shut down before installing the setup program.
H
If no valid license number is entered during the installation, the
setup program will remain fully functional for 30 days. After this
time, the data transmission, data storage and printout functions
will be disabled.
H
Please note that not all functions are available to all users.