JUMO flowTRANS US W02, Краткие инструкции

Страница: 27 / 48

27
8 Operation
8 Operation
8.1 Display elements
8.1.1 Startup display
The startup display appears on the display as soon as the voltage supply to the device is established.
The startup display switches to the process display after approximately five seconds.
8.1.2 Process display
Orientation: 0°, 180° Orientation: 90°, 270°
Pos. Designation Description
1 Startup display Shows the device software version.
2, 3 Shows the device hardware version.
4 Shows the Bluetooth module software version.
5 Shows the device TAG (application-spec. marking).
JUMO flowTRANS US W02
TAG:
01.01
Main SW:
439.02.01
Main HW:
464.01.01
BT SW:
I/O HW: 01.01
JUMO flowTRANS US
W02
TAG:
01.01
Main SW:
439.02.01
Main HW:
464.01.01
BT SW:
I/O HW: 01.01
(1)
(5)
(2)
(3)
(4)
Orientation: 0°, 180° Orientation: 90°, 270°
Pos. Designation Description
1 Status bar Shows information about the device status.
2, 3 Process value display 1 ,
Process value display 2
Show the following values and messages:
•
Both configured process values (actual values)
• the process value system units
• the totalizer for the totalizer function
• The fill volume or residual volume for the batch function
• Error messages  "Troubleshooting", Page 40
4 Toolbar Shows:
•
The configuration and status of I/O Pin 1 and I/O Pin 2
• The configuration and status of the interface connections