JUMO exTHERM-DR, Руководство по эксплуатации, Страница: 17 / 100

3 Mounting 17
3.2 Mounting site, DIN-rail mounting
3.3 Close mounting
The device is not suitable for installation in potentially explosive areas.
v
Chapter 6.1 "Bestimmungsgemäße Verwendung"
The device is clipped to a 35 mm DIN rail (DIN EN 60715) from the front and
locked into place by pressing downwards.
v
The ambient conditions at the mounting site must meet the requirements
specified in the technical data.
Chapter 10 "Technische Daten"
a
The mounting site should be as vibration-free as possible to prevent the screw connections from working loose.
a
The mounting site should be free from aggressive media (e.g. strong acids and lyes), and as free as possible from
dust, flour, or other suspended matter to prevent blocking of the cooling slots!
a
Maintain the minimum distance of 20 mm to the top and the bottom.
1. So that the release slot can still be accessed with a screwdriver from the bottom.
2. So that when dismounting, the device can be swiveled upwards and removed from the DIN rail.
a
Several devices can be mounted right next to one another without a minimum distance.