JUMO AQUIS touch P 202580, Руководство по эксплуатации

Страница: 287 / 322

287
19 PC Setup Program
Setting up the e-mail server
To send messages, you must specify the data for the outgoing mail server.
Open the server settings window and enter the information here. You can obtain
the server settings from your e-mail service provider or network administrator.
Open the dialog for the server settings:
Only Setup
r
E-mail (double-click)
r
"E-mail Server" button
The following table explains the settings for the e-mail server.
Configuration point Selection/
setting option
Explanation
Authentication None
SMTP-After-POP
SMTP-Auth Authentication process (login) for the e-mail serv-
er
You receive the configuration data for the e-mail
server from the operator of the e-mail service that
you use to send e-mail.
E-mail user name Input text User name of the e-mail account for the device
for authentication (logging on to the e-mail serv-
ers)
E-mail password Input text Password of the e-mail account for the device for
authentication (logging on to the e-mail servers)
Server URL POP3 Input text URL (Internet address) or IP address of the in-
coming mail server (POP3 server)
e. g. pop.provider.com
Server URL SMTP Input text URL (Internet address) or IP address of the out-
going mail server (SMTP server)
e. g. smtp.provider.com
E-mail sender Input text E-mail address of the e-mail account for the de-
vice
e. g. Anlage@provider.com