JUMO 405052, Руководство по эксплуатации

Страница: 25 / 54

25
6 Operation
6.4.5 Display and operation
Switching delay
(for second switching
output only) 0.00 ... 99.99 s
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Parameter Display Setting range
1
Display position Normal (for normal operation)
Rotated (for overhead operation)
See section 7.15 "Setting the display alignment
(D.Dir)", page 41.
Unit of actual value display
(for analog output only) Pressure unit (see parameter "Uni.P")
Percentage of the scaled range
See section 7.16 "Setting the display unit (D.Uni)",
page 42.
Version D Software version of the operating device
See section 7.17 "Displaying the version of the
operating device software (SW.Di)", page 43.
Version S Software version of the signal stage
See section 7.18 "Displaying the version of the
signal stage software (SW.Si)", page 43.
Code
(can only be edited via
setup program)
0000 ... 0072 .... 9999
See section 7.2 "Unlocking the instrument (code
entry)", page 27.
Parameter Display Setting range
1