Multi-Purpose
Steam Cleaner
User Manual
1
2
8
7
9
3
3
4
6
5
A. Introduction
Thank you for purchasing our steam cleaner, and
welcome to the Jumbl™ family. This user manual is
meant to offer you a brief walkthrough of the
device’s features and usage protocols. We hope you
find this manual helpful. For additional information
and technical support, please feel encouraged to
contact our help team at [email protected].
B. Important Information
• Please read and comply with all instructions
included in this manual
• Use steam cleaner for private household
applications
only
• Use only appropriate accessories, as described in
the operating instructions
• Do not operate appliance in areas of high pressure
or explosion risk
• Never use appliance in pools containing water
• Appliance should not be used to clean electrical
appliances such as ovens, exhaust fans,
microwave ovens, televisions, lamps, hair dryers,
electrical heating systems, etc.
• Check that appliance and any accessories are in
faultless condition before use
• Do not operate if appliance shows any visible
damage
• If power cord is damaged, arrange for
repair/replacement by a skilled electrician
• If steam hose is damaged, replace only with
manufacturer-recommended part (see spare parts
list for item number)
• Never touch power cord or socket with wet
hands
• Never use appliance to clean objects containing
hazardous substances (e.g. asbestos)
• Never touch hands to steam jet at a short
distance
• Never direct steam jet at persons or animals
• Never leave appliance unattended when in use
• Exercise caution while cleaning tiled walls with
electrical
sockets
• Protect power cable from heat, oil and sharp
edges
• Never pour solvents, solvent-containing liquids or
undiluted acids (e.g. detergents, benzene, paint
thinner, and acetone) into water reservoir
• Keep appliance away from excessive moisture or
rain. Do not store outside
Note: Persons with reduced physical, sensory or
mental abilities should not operate this appliance,
unless they are supervised by a person responsible
for their safety or are instructed by these persons in
the use of the appliance. Children should be
supervised.
C. Box Contents
1 x Multi-Purpose Steam Cleaner
1 x Tip Nozzle Attachment
1 x Ironing Brush Attachment (2 parts)
1 x Round Brush Attachment
1 x Glass Squeegee (4 parts)
1 x Detail Steamer Attachment
1 x Lint-Removing Cover Cloth
1 x Steam Head Cleaner Pin
1 x User Manual
D. Parts & Controls
1. Water Reservoir
2. Steam Release Lever
3. Tip Nozzle Attachment
4. Ironing Brush Attachment (shown assembled)
5. Round Brush Attachment
6. Glass Squeegee (shown assembled)
7. Power Button
8. Reservoir Release Tabs
9. Steam Release Lever Lock Switch
E. Operation
Quick Start Guide:
• Press down both Reservoir Release Tabs (#8)
• Remove Water Reservoir (#1) and pull out rubber
cover
• Fill Water Reservoir (#1) with water only, and
close reservoir cover
• Insert Water Reservoir (#1) into steam cleaner
until it clicks
• Plug power cord into any standard wall outlet
• Press the power button and it will light up red
• Allow approximately 15 seconds for heat-up
• Slide Lever Lock (#9) downwards, and depress
lever
Attaching Accessories:
• Select the proper attachment for your steaming
application
• Align attachment’s grooves with the posts on
steam
nozzle
• Push in and turn clockwise to secure
Assembling Glass Squeegee (#6):
• Align metal-reinforced squeegee rubber with main
attachment
arm
• Swing backing plate lip into main attachment arm
• Insert plastic tightening screw cap and turn
clockwise until tight
Note: This squeegee IS NOT an attachment, and
cannot be connected to the steam cleaner. Use as
independent handheld tool.
Removing the Accessories:
• Exercise caution: Hot water may drip from
accessory when detaching
• Allow steam cleaner to cool off completely
• Slide Lever Lock (#9) upwards, locking Lever (#2)
in
place
• Turn attached accessory counterclockwise and
gently pull off steam nozzle
Powering on:
Caution: Water Reservoir (#1) must be installed and
filled. Do not operate Manual Decalcification Pump
(#7) when powered off, as this will pump water into
appliance and spurt it out of steam nozzle when
connecting the power cord.
• Plug power cord into any standard wall outlet
• Allow approximately 15 seconds for heat-up
• Slide Lever Lock (#9) downwards
• Depress Steam Release Lever (#2) to control
steam
Note: During initial startup, steam nozzle may
release irregular, moist vapor. This appliance
requires a short run-in time of up to 1 minute, after
which vapor will be consistent.
