Julabo Pura 10, Оригинальное руководство по эксплуатации

Страница: 22 / 32

Operation
22
8.6 Emptying the water bath
Drain the water to clean inside the water bath or to change samples.
CAUTION
Risk of burns from hot bath fluid!
Bath fluid can become very hot during a temperature control process.
Contact with hot bath fluid can cause scalding.
• Before draining the device, let it cool to room temperature
• Avoid direct contact with hot bath fluid
• Wear protective gloves

Slotted screwdriver, size 3
 The device is switched off and cooled to room temperature.
1. Disconnect the power cable.
2. PURA 4: The water bath can now be poured into a suitable container.
All other PURA models:
3. Place a container suitable for collecting the bath fluid underneath the drain
screw.
4. Unscrew the drain screw.