Julabo Magio MX, Оригинальное руководство по эксплуатации

Страница: 52 / 100

Operation
52
8.3.2 Change language to English
A special function makes it easy to change the user interface language to
English at any time.
 The device is switched on.
1. Call up the <Main menu> .
2. Tap the <Main menu> text field on the left menu item for more than 3
seconds.

The language will be changed to English.
8.3.3 Set date and time
The date and time is preset ex works. This section describes how you can set the
date and time yourself.
 The device is switched on.
1. Call up the <Main menu> .
2. Call up the submenu <Settings> then menu option <Date/time> .
 The submenu shows the currently set date and time as well as selectable
display formats.
3. Set the date and time with the keypad shown and then confirm your input
with [OK] .
4. Select the desired display format.

The date and time are set.
8.3.4 Activate autostart function
The autostart function makes it possible to start a temperature control
application directly using the mains switch or via an intermediate timer.
The device is configured ex works in such a ways that it switches to a safe
operating status in the event of power failure. The autostart function is
deactivated. The display shows “OFF.” The refrigeration aggregate, heater, and
pump motor are disconnected from the mains voltage.
 The device is switched on.
1. Call up the
<Main menu>
.
2. In the submenu <Adjust safety> activate the interface [Autostart] .

The autostart function is activated. The next time the device is switched on,
the temperature control application will immediately start with the preset
values. You can also insert and program a timer. In this case the mains
switch of the device must remain on.