Julabo DYNEO DD Скачать руководство пользователя страница 9

Страница: 9 / 96

About this manual

2.3 Warnings

The manual contains warnings to increase safety when using the device.
Warnings must always be observed.
A warning sign displayed in signal color precedes the signal word. The signal
word, highlighted in color, specifies the severity of the hazard.

CAUTION

This signal word designates a danger with a low level of risk which, if it not

prevented, may result in minor to moderate injuries.

WARNING

This signal word designates a danger with a medium level of risk which, if it

not prevented, may result in death or serious injuries.

DANGER

This signal word designates a danger with a high level of risk which, if it not

prevented, will result in death or serious injuries.

NOTE

This signal word designates a possibly harmful situation. If it is not avoided,
the system or objects in its vicinity may be damaged.

Содержание DYNEO DD

































































































Результаты поиска

Содержание DYNEO DD

Отзывы:

Бренды по названию

Популярные бренды

Julabo DYNEO DD, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание DYNEO DD

Отзывы:

Бренды по названию

Популярные бренды