Julabo BAT7146, Руководство по эксплуатации, Страница: 77 / 172

Shaking Water Baths
75
E
ngl
is
h
8.7. Evaluation of the temperature limits
The high- and low-temperature limit can be adjusted in two ways
(see page 66)
3. As pure warning function with an acoustic warning signal in
regular intervals.
Adjustment „Li 0“ – factory adjustment
4. As temperature limit by switching-off the heating. Adustment „Li
1“
The alarm is indicated by optical and audible signals
(continuous tone) and on the MULTI-DISPLAY (LED) appears
the error message "
E rror 01 ".
1.
Press and at the same time.
2.
Use the cursor keys to select the menu option
Limit. (example: „Li 0“).
3.
Select the alternative state with the edit keys and
confirm the selection with the ENTER key (display „Li 1“).
4.
Press and at the same time.
9. Safety installation (with shutdown function)

))))
(excess temperature protection)
These safety installations is independent of the control circuit.
When the temperature of the bath liquid has reached the safety
temperature, a complete shutdown of the heater and pump (only
CW-models) is effected.
The alarm is indicated by optical and audible signals (continuous
tone) and on the MULTI-DISPLAY (LED) appears the error
message "
E rror 01 ".